X606 High Gain Yagi Antenna for 1.394GHz Video

X606 High Gain Yagi Antenna for 1.394GHz Video

The X606 antenna concentrates the signal into a beam of 22 degrees. It is used on the RX7301 Video Receiver to improve the video quality.

Product Details


This type of antenna concentrates the signal into a beam of 22 degrees. It is used on the RX7301 Video Receiver to improve the video quality. It not only reduces interference from other sources in the receiver but amplifies the transmitter signal to compensate for losses in the antenna feeder.


Antenna Mounting

Antenna should be mounted as high as possible in a clear area as far away from obstructions such as metal clad buildings and foliage.

Feeder Cable

When designing a radio system the manufacturers data on 50 ohm coaxial cable must be referred to. The antenna feeder cable should be kept as short as possible. As a general rule, with 50 ohm low loss coaxial cable, half the power (3dB) will be lost every 10 - 20 metres.

RG316 has an attenuation of 6.89dB every 10m at 500MHz
RG58 has an attenuation of 3.7dB every 10m at 500MHz
UR76 has an attenuation of 3.6dB every 10m at 500MHz
RG213 has an attenuation of 1.7dB every 10m at 500MHz
RG67 has an attenuation of 1.5dB every 10m at 500MHz
LDF2-50 10mm Foam Helix has an attenuation of 0.8dB every 10m at 500MHz

Antenna Connectors

50 ohm coaxial connectors of good quality should be used. Termination must be in accordance with the manufacturers specification. Connectors exposed to the environment should be sealed to prevent the ingress of moisture. If the cable is penetrated by moisture an impedance mismatch will occur dramatically reducing the signal propagation. The cable will then have to be replaced.

Antenna Measured VSWR

The Voltage Standing Wave Ratio (VSWR) is the ratio of detected volts from the forward RF power, to the detected volts from the reflected RF power. In perfect antennas system all the RF power will be radiated by the antenna giving a VSWR of 1:1. If most of the RF power is reflected back into the transmitter then the VSWR will be 2:1. A good antenna system will have a VSWR of between 1.2:1 and 1.5:1.

Antenna Lightning Arrestors

At exposed antenna installations a lightning arrestor should be installed. This is connected in line with the antenna feeder. The case of the arrestor is connected to a solid earth. Should lightning occur, most of the energy will be diverted to ground thereby protecting the radio equipment.

Ref Description Downloads Price Quantity  
Join Our E-News

Sign up today for our free weekly email newsletter.

Latest News

  • ISO 9001:2008

    Warwick Wireless has been assessed and certified a...

  • 8200-IP Radio Modem Tested for Lifetime Shock and Vibration

      The X8200-IP Radio Modem has successfully ...

View More News
Head Office:
Unit 16
Sapcote Road Industrial Estate,
Hinckley, Leicestershire,
LE10 2AU. United Kingdom
  • Phone (International): +44 1455 233616
  • Fax (International): +44 1455 233179
  • Phone (UK): 01455 233616
  • Fax (UK): 01455 233179
  • e-mail: sales@radiotelemetry.co.uk